Bolian Filtration Solutions Co., Ltd.

Vacuum Belt Filter Cloth Wrinkles Causes

In the event of issues with the vacuum belt filter cloth on the machine, such as wrinkles, these should be addressed promptly to prevent significant impact on the filter cloth's performance.


Vacuum belt filter cloth wrinkle causes

1. Misalignment of the equipment's wind-up wheel and other rollers can result in a disparity in stroke length, leading to run-outs and creases.

2. Misalignment when installing vacuum belt filter cloths.

3. The vacuum belt filter cloth's quality is substandard. The folds are a result of the material's mechanical strength and the stretching deformation caused by gravity.

4. The equipment was not sufficiently tensioned. This resulted in stretching and deformation of the material under the force of gravity, leading to creases.

5. The vacuum belt filter cloth is not being handled correctly during the joint installation process. This has resulted in misalignment due to wrinkles.

6. Foreign matter in the contact position between the roller of the equipment and the filter cloth can cause misalignment and formation of folds.


Vacuum_Belt_Filter_Cloth.jpg


Therefore, when utilizing a vacuum belt filter, it is essential to halt the machine promptly to inspect the pleats if a pleated situation is encountered. Otherwise, the pleats may become folded and damaged.


BOLIAN vacuum belt filter cloth is characterized by its high strength, abrasion resistance, and durability. It is not easily folded or torn, and it has a long service life. For more information, please visit the official BOLIAN website.